In the cold winter, the temperature will be lower, and the low temperature may cause the rust proof oil to solidify, stratify and become turbid. The antirust oil can be heated properly. Soak the antirust oil in hot water of about 50 ℃ for about 20 minutes, and then stir it evenly. Please note: volatile flammable temperature should be reduced to avoid danger. Aluminum alloy cleaning agent

Before using antirust oil in winter, we must make some preparations, for example, degreasing, drying and cleaning the surface can achieve good results. No matter how much paint is sprayed in a single time, the effect is better than that of spraying in two times (one coat of paint can only be sprayed for the second time after it is completely dried, and the other coat is dried for about 5 minutes)

Special attention should be paid to the following points

After the operation, it needs to wait until the solvent of the product is completely volatilized before packaging, because Tianjin fast drying antirust oil takes a long time to dry in winter.

After using the quick drying antirust oil in Tianjin, please spray it for 2-3 seconds to avoid clogging the nozzle and affecting the next use.

Please do not spray on electronic components with conductive circuit (such as circuit board) to prevent short circuit or open circuit.

Avoid using when the equipment is charged.

From the above points, rust preventive oil is generally a stable material, but it is sensitive to low temperature. When using antirust oil in winter, we must pay attention to the temperature control and see whether the surface is dry.

How much is the heavy oil cleaning agent