1. The main reason for bubbles

The level of the cutting fluid is too low.

The flow rate of the cutting fluid is too fast, and the bubbles have no time to overflow. Spray cleaning agent

There are too many right angles in the sink design, or the nozzle angle of the cutting fluid is too straight.

Heavy oil cleaning agent price

2. Ways to avoid foam

In a centralized cooling system, the pipelines are connected in series in stages, and the pressure of the pipeline near the cooling box should be lower.

Ensure that the liquid level of the cutting fluid is not too low, check the liquid level in time, and add the cutting fluid in time.

Do not control the cutting fluid flow rate too fast.

When designing the sink, it should be noted that the right angle of the sink is not too much.

When using cutting fluid, pay attention to the cutting fluid nozzle angle not to be too straight.

The above content is provided by the wire cutting fluid manufacturer for your reference only